Driver/Front Passenger Backrest Heating Element -Z7- / - Z9-, Removing And Installing, Standard Seat, Sport Seat Folding Seat: Installing
-- Align new heating element on backrest cushion.
CAUTION:
- Make sure the new heating element is affixed to the old heating element.
- Remove the protective foil off the heating element in the affixing sequence.
- When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.
-- Bond the individual areas of the heating element in the sequence -A and B-.
-- Route the connecting wires to the individual heating surfaces in the base of the gaps -arrows-.
-- Pull electrical wire -2- through the slit in cushion -1-.
Install in reverse order of removal.