LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls & Housing - MULTITRONIC Transmission 0AW (Sedan) (As Of 11.2014) >> 37 Controls, Housing >> Selector Mechanism >> Selector Shaft Seal, Replacing

Selector Shaft Seal, Replacing

Procedure 

NOTE:

The selector shaft seal can only be replaced for removed transmissions.

-- Remove the transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING .

-- Replace the selector shaft seal. Refer to SELECTOR SHAFT SEAL, REPLACING .

-- Checking. Refer to ATF LEVEL, CHECKING  after installing the transmission.

scientia non olet · About LEMON Manuals