RS 4 Emblem, Removing and Installing

Removing 

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Release the tabs in direction of -A arrows-.

-- Remove the quattro name badge -1- on the vehicle exterior from the radiator grille in direction of -arrow B-.

Fig 1: Removing/Installing RS 4 Emblem

Courtesy of AUDI OF AMERICA, LLC

Installing 

Install in reverse order of removal. Note the following:

-- Position the quattro name badge on the radiator grille and press it on until it clicks into place.

-- Install the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .