LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Final Drive & Driveshaft - Rear Final Drive (Sedan) (As Of 05.2015)) >> 39 Final Drive, Driveshaft >> Final Drive >> Overview - Final Drive >> Overview - Final Drive 0BC, 0BD >> Balance Weight on the Rear Final Drive

Balance Weight on the Rear Final Drive

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Rear Final Drive Balance Weight
GWWA39-10466Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 22 Nm
  2. Balance Weight
    • Depending on the date of manufacture; for allocation.
  3. Rear Final Drive
  4. Crossmember
  5. Balance Weight
    • Depending on the vehicle; allocation .
  6. Bolt
    • Tightening specification. Refer to -item  4- Bolt (See Figure).
  7. Balance Weight
    • Depending on the date of manufacture; for allocation .
  8. Washer
  9. Bolt
    • Tightening specification. Refer to -item  4- Bolt (See Figure).
scientia non olet · About LEMON Manuals