Noise Insulation, Removing And Installing: Removing

-- Turn off the ignition.

-- Remove the shift lever knob with the shift lever boot. Refer to GEARSHIFT KNOB, REMOVING AND INSTALLING .

Fig 1: Identifying A/C Display Control Head, Shift Lever Boot And Bezel

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Multimedia System Control Head -E380-. Refer to Multimedia System Control Head -E380-, REMOVING AND INSTALLING .

-- Release the tabs -1- in direction of -arrow-. Raise the rear noise insulation when doing this.

Fig 2: Identifying Noise Insulation Over Shift Mechanism

Courtesy of AUDI OF AMERICA, LLC

-- Pull the noise insulation off the tabs -3-.

-- Pull the boot -2- off the gearshift lever in direction of -arrow-.