LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Rear Final Drive 0BF & 0BE - Sport Differential - General & Technical Data (Sedan)) >> 00 General, Technical Data >> Codes, Transmission Allocation, Ratios And Capacities >> Codes, Transmission Allocations, Ratios And Capacities (AUDI A5 SPORTBACK From My 2010)

Codes, Transmission Allocations, Ratios And Capacities (AUDI A5 SPORTBACK From My 2010)

WARNING: This page is about a different variant/trim than selected.
Rear Final Drive   0BF
Codes   LFV MBV MBW
Ratio Final drive Z2 : Z1 37 : 9 = 4.111 35 : 9 = 3.889 37 : 10 = 3.700
Driveshaft flange diameter   75.5 mm 75.5 mm 75.5 mm
Gear oil - capacity
  • For rear final drive (differential and pinion)
  • No replacement interval
 Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity
  • For the hydraulic control unit and chambers
  • No replacement interval
 Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
Rear Final Drive   0BF
Codes   MKU MKX MKY
Ratio Final drive Z2 : Z1 37 : 9 = 4.111 35 : 9 = 3.889 37 : 10 = 3.700
Driveshaft flange diameter   75.5 mm 75.5 mm 75.5 mm
Gear oil - capacity
  • For rear final drive (differential and pinion)
  • No replacement interval
 Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
ATF capacity
  • For the hydraulic control unit and chambers
  • No replacement interval
 Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article .
scientia non olet · About LEMON Manuals