Transmission/Engine Allocation (AUDI A4 ALLROAD From My 2008)
WARNING: This page is about a different variant/trim than selected.
Refer to Parts for the Following Information.
- Date of manufacture
- Transmission fluid specification
- The individual gear ratios
- Flange shaft allocation
- The dual mass flywheel allocation
- Clutch disc and pressure plate allocation
- Rear final drive allocation using code and PR number
| Manual Transmission | 6-Speed 0B2 AWD | |||
|---|---|---|---|---|
| Codes | KVS | LLY | LSC | |
| Allocation | Type | Audi A4 allroad from MY 2008 | Audi A4 allroad from MY 2008 | Audi A4 allroad from MY 2008 |
| Engine | 2.0L TFSI - 155 kW | 2.0L TFSI - 155 kW | 2.0L TFSI - 155 kW | |
| Ratio | Final Drive | 29 : 8 = 3.625 | 29 : 8 = 3.625 | 29 : 8 = 3.625 |
| Intermediate drive | 31 : 29 = 1.069 | 31 : 29 = 1.069 | 31 : 29 = 1.069 | |
| Manual Transmission | 6-speed 0B2 AWD | |||
|---|---|---|---|---|
| Codes | MRS | MVV | PJB | |
| Allocation | Type | Audi A4 allroad from MY 2008 | Audi A4 allroad from MY 2008 | Audi A4 allroad from MY 2008 |
| Engine | 2.0L TFSI - 155 kW | 2.0L TFSI - 155 kW | 2.0L TFSI - 165 kW | |
| Ratio | Final Drive | 29 : 8 = 3.625 | 29 : 8 = 3.625 | 29 : 8 = 3.625 |
| Intermediate drive | 31 : 29 = 1.069 | 31 : 29 = 1.069 | 31 : 29 = 1.069 | |