Transmission, Transporting
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Hook And Support Tool 3311 with Hook And Support Tool - Bolt 3311/1
- Shop Crane VAS6100
Procedure
- Transmission removed.
CAUTION:
Transmission components could be damaged if they are not set down correctly.
- Do not set the transmission on the ATF pan.
WARNING:
An accident could result if the transmission is not secured correctly.
- Exchange the bolt on the Hook and Support Tool 3311 for a new, longer bolt Hook And Support Tool - Bolt 3311/1.
- Only this way can the transmission be secured.
-- Secure the transmission on the Hook And Support Tool 3311 (use new longer bolts Hook And Support Tool - Bolt 3311/1).
-- Lift and transport the transmission with the Shop Crane VAS6100.
NOTE:
Ignore Holding Plate VW309.