LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Final Drive & Driveshaft - Rear Final Drive (Sedan) ( (As Of 05.2010)) >> 39 Final Drive, Differential >> Specifications >> Fastener Tightening Specifications >> Driveshaft Heat Shield - Tightening Specification

Driveshaft Heat Shield - Tightening Specification

WARNING: This page is about a different variant/trim than selected.

-- Tighten the bolts -arrows- to 24 Nm.

Fig 1: Identifying Driveshaft Heat Shield & Bolts
GWWA10-10859Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals