LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Final Drive & Driveshaft - Rear Final Drive (Sedan) ( (As Of 05.2010)) >> 39 Final Drive, Differential >> Description And Operation >> Rear Final Drive Assembly Overview >> Attaching the Rear Final Drive to the Assembly Stand

Attaching the Rear Final Drive to the Assembly Stand

WARNING: This page is about a different variant/trim than selected.

-- Attach the rear final drive to the holding fixture VW 540 using M10 x 40 bolts -arrows-.

Fig 1: Attaching Rear Final Drive To Holding Fixture
GWWA39-10275Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals