Right Seal, Replacing: Installing
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Lightly oil the new gasket on the outer edge.
-- Drive in the seal all the way without tilting using the :T40163 .
-- Fill the space between the sealing/dust lip halfway with Sealing Grease :G 052 128 A1 .
-- Install the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .