Loosen the Threaded Connection between the Drive Axle and Wheel Hub
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- With vehicle still standing on its wheels, loosen bolt a maximum of 90°, otherwise wheel bearing will be pre-damaged.
-- Remove the rear wheel. Refer to WHEELS AND TIRES .
-- Lift the vehicle just enough so that the wheels are hanging free.
-- Have a second technician push the brake pedal.
-- Remove the bolt -arrow-.