LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 906 (Engine Cooling System (Service Information - CYNB - 1 Of 2)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Valves, Removing And Installing >> Transmission Coolant Valve -N488-, Removing And Installing >> Installing

Transmission Coolant Valve -N488-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

NOTE:

Secure all hose connections with hose clamps that match the ones used in series production.

-- Install The Noise Insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals