LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 893 (Seats System (Frames- Service Information - 2 Of 2)) >> Seat Frames >> Rear Seats >> Rear Seat Backrest, Removing And Installing >> Mount/Sleeve/Pins, Removing And Installing, Rear Seat Backrest >> Remove Exterior Bearing Sleeve

Remove Exterior Bearing Sleeve

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-10646Courtesy of AUDI OF AMERICA, LLC

-- Unclip the bearing sleeve -2- from the rear seat backrest frame -1- using the :3409  and remove it.

CAUTION:

Be careful not to damage the backrest cover when removing the bearing sleeve.

scientia non olet · About LEMON Manuals