LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (3.0L - Ignition/Glow Plug System - Engine Code(S): CCBA, CGXC & CTUB (Sedan) (As Of 02.2015)) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Removing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Noise Insulation Components
GWWA10-10624Courtesy of AUDI OF AMERICA, LLC

-- Remove the noise insulation by loosening the fastening elements -1, 2 and 3-.

-- Disconnect the connector -2-.

Fig 2: Locating Engine Speed (RPM) Sensor -G28-
GWWA28-10011Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the Engine Speed Sensor -G300-.

scientia non olet · About LEMON Manuals