Camshaft Position Sensor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Covers

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front engine cover -1- upward.

-- Disconnect the connector -1-.

Fig 2: Identifying Connector -1- And Bolt -Arrow-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and the Camshaft Position Sensor -G40- (cylinder bank 1).

-- Disconnect the connector -1-.

-- Remove the bolt -arrow- and the Camshaft Position Sensor 2 -G163- (cylinder bank 2).

Fig 3: Connector -1- From (CMP) Sensor

Courtesy of AUDI OF AMERICA, LLC