Oil Separator, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Intake Manifold Lower Section And Bolt/Nut Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses. Refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .

-- Remove the upper coolant pipe. Refer to UPPER COOLANT PIPES, REMOVING AND INSTALLING .

-- Remove the left lower section of the intake manifold. Refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove the high pressure lines and oil separator cover -1-.

Fig 2: Identifying Oil Separator Cover

Courtesy of AUDI OF AMERICA, LLC