LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 530 (3.0L - Lubrication - Engine Code(S): CCBA, CGXC & CTUB (Sedan)) >> 17 Lubrication >> Crankcase Ventilation >> Crankcase Ventilation Hoses, Removing And Installing >> Crankcase Ventilation Hoses, Removing And Installing, Rest Of World Vehicles >> Removing

Crankcase Ventilation Hoses, Removing And Installing, Rest Of World Vehicles: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Crankcase Ventilation Hoses
GWWA17-10433Courtesy of AUDI OF AMERICA, LLC
NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the supercharger. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Remove the crankcase ventilation hoses -arrows- from the cylinder head covers.

-- Free up the crankcase ventilation hoses.

-- Remove the bolt -1- and the connections for the crankcase ventilation hoses.