LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Gears & Hydraulic Controls - Automatic Transmission 0BK (Sedan)) >> 38 Gears, Hydraulic Controls >> Description And Operation >> ATF Pan, ATF Strainer And MECHATRONIC Overview >> MECHATRONIC, Tightening Specification And Sequence

MECHATRONIC, Tightening Specification And Sequence

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Tighten the bolts to 10 Nm in the following sequence: -1 to 19-.

Fig 1: Mechatronic, Tightening Sequence
GWWA38-10113Courtesy of AUDI OF AMERICA, LLC
NOTE:

Bolts -18- and -19- are shorter.

Bolt -18- attaches the transmission output speed sensor to the transmission housing.

Bolt -19- attaches the Mechatronic connector to the transmission housing.

scientia non olet · About LEMON Manuals