LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (3.2L - Engine Mechanical, Engine Code(S): BKH) >> 17 - Engine - Lubrication >> Lubrication system components, removing and installing >> Lubrication system components, removing and installing

Lubrication system components, removing and installing

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: This document contains Volkswagen World Wide content. Not all of the information applies to the US and Canadian Market.
NOTE:
  • If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages must be carefully cleaned to prevent resulting damage and the oil cooler must be replaced.
  • The oil level must not be above the max. mark - danger of damage to catalytic converter!
  • Viscosity classes, oil specifications, oil capacities Maintenance tables.
scientia non olet · About LEMON Manuals