LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Power Window Control System (Diagnostic Codes & Symptom Tests)) >> Power Window Control System >> Symptom Tests >> Rear Power Window RH does not Operate with Rear Power Window Switch RH [08/2013 - ] >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ] . Troubleshoot the power window control system after confirming that the communication system is functioning properly.
  • If the power window regulator motor assembly (for rear RH door) has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [08/2013 - ] .
  • If the main body ECU (multiplex network body ECU) is replaced, refer to Registration. Refer to REGISTRATION [08/2013 - ] .
  • Check that the window lock switch is off before performing the following procedure.