LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Power Window Control System (Diagnostic Codes & Symptom Tests)) >> Power Window Control System >> DTC B2312: Power Window Switch Malfunction [08/2013 - ] >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

HINT: 

If DTC B2312 is not output again after the DTC has been cleared, the DTC was output due to the switch being held.

NOTE:
  • DTC B2312 is stored in the multiplex network master switch assembly and in each power window regulator motor assembly (power window ECU).
  • If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system. Refer to INITIALIZATION [08/2013 - ] .