Inspection [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY
- Measure the resistance according to the value(s) in the tables below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Condition Specified Condition 2 (+) - 1 (-) Always 6 to 10 Ω TEXT IN ILLUSTRATION*a Component without harness connected
(Vehicle Approaching Speaker Assembly)HINT:
- Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker.
- Make sure that there are no abnormalities with the vehicle approaching speaker such as the presence of foreign material or tears in the paper of the speaker cone.
If the result is not as specified, replace the vehicle approaching speaker assembly.
- Measure the resistance according to the value(s) in the tables below.