Inspection Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If the main body ECU (multiplex network body ECU) is replaced, refer to Registration. Refer to REGISTRATION [08/2013 - ] .

HINT:

The meter illumination level can be adjusted by operating the light control rheostat switch.
Setting the meter illumination to minimum brightness (very dim) turns off the meter illumination when the headlight dimmer switch assembly is turned to the tail, head, or AUTO position.
Before starting the following inspection, check if lighting system DTCs are output. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ] .