Inspection [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FRONT DRIVE SHAFT ASSEMBLY

Check that there is no excessive play in the radial direction of the outboard joint.

Fig 1: Checking For Excessive Play In Outboard Joint And Inboard Joint
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Check that the inboard joint slides smoothly in the thrust direction.
Check that there is no excessive play in the radial direction of the inboard joint.
Check the boots for damage.

Check whether the drive shaft dimensions (A) are within the following specifications.

Fig 2: Identifying Front Drive Shaft Assemblies

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*A	LH Side
*B	RH Side

NOTE:

Keep the drive shaft assembly level during inspection.

Dimension (A)

	Dimension (A)
LH Side	576.9 mm (1.89 ft.)
RH Side	914.4 mm (3.00 ft.)