Installation [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL GENERATOR CABLE
1. Clean and degrease the bolt holes.
2. Install the generator cable to the hybrid vehicle transaxle assembly with 4 new bolts.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
INSTALL INVERTER TRAY BRACKET SUB-ASSEMBLY
1. Temporarily install the inverter tray bracket sub-assembly to the body with the 4 bolts.
  
  Fig 1: Identifying Inverter Tray Bracket Bolts With Tightening Sequence
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT:
  
  Temporarily tighten the bolt (1) first.
2. Install the 4 bolts in the order shown in the illustration.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
INSTALL INVERTER WITH CONVERTER ASSEMBLY
Refer to INSTALLATION [08/2013 - ]