Wheel bearing housing (steel) - all wheel drive, servicing: Notes
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools, testers and auxiliary items required
- Thrust plate VW 401
- Punch VW 408 A
- Punch VW 412
- Sleeve VW 415 A
- Press piece 2050
- Thrust pad 3005
- Assembly tool 3253/1
- Press tool 3345
- Press tube 30-100
1 - Wheel bearing housing
- Removing and installing → Stub axle carrier/wheel bearing housing and wheel bearing unit
2 - Wheel bearing
- Interior diameter in tiered version
- Installed location: Larger internal diameter of wheel bearing faces wheel hub
- Pressing out Pressing wheel bearing out of wheel bearing housing
- Pressing in Pressing wheel bearing into wheel bearing housing
3 - Shield plate
4 - Wheel hub
- Tiered version
- Pressing out Wheel hub, removing
- Pressing in Pressing wheel hub into wheel bearing
- Light weight wheel hub → Light weight wheel hub
5 - Torx bolt
- Torque specification → 46 - BRAKES - MECHANICAL COMPONENTS
6 - Rubber bushing
- Removing Rubber bushing, removing ,
- Installing Rubber bushing, installing ,