Suspending transmission vertically

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Using Workshop Crane VAS 6100 To Insert Transmission Into Holding Fixture VW 313

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Secure transmission to assembly block with 2 bolts.
Install transmission support VW 353 onto holding plate VW 309.
Using Shop Crane VAS 6100 , insert transmission into Holding Fixture VW 313.

CAUTION: Center of gravity of transmission is outside center of rotation at holding fixture. To turn the transmission, a second technician must hold the transmission housing to prevent back-swing.