Measure needle bearing drive-in depth and secure needle bearing with peening
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Drive-in dimension - a - = 88.0 ± 0.5 mm
- To peen, use blunt center punch with ball-shaped end (ball dia. 5 mm).
- Needle bearing is secured with three peening marks on circumference every 120°- arrows -.