LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing) >> 34 - Controls, housing >> Transmission cover, servicing >> Transmission cover, servicing >> Remove ball sleeve from transmission housing

Remove ball sleeve from transmission housing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Remove Ball Sleeve From Transmission Housing
GW00019250Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Support , e.g. Kukko 22/2

B - Internal puller 14.5 to 18.5 mm , e.g. Kukko 21/2

C - Stud M10

NOTE:
  • You can also use adapter VW 771/44 in place of stud M10 and VW 771/15.
scientia non olet · About LEMON Manuals