LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (6-Speed Manual Transmission 01X, Front-Wheel Drive) >> 34 Controls, housing >> Transmission cover, servicing >> Transmission cover, servicing >> Driving ball sleeve into transmission cover until flush

Driving ball sleeve into transmission cover until flush

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driving Ball Sleeve Into Transmission Cover Until Flush
GW00019008Courtesy of VOLKSWAGEN UNITED STATES, INC.

Install ball sleeve - 1  - and - 2  - so that side with lettering (thicker metal) faces guide pin 10 - 15 or centering mandrel 3176.

NOTE:
  • Due to the housing depth use centering mandrel 3176 for driving in ball sleeve - 2  -.
scientia non olet · About LEMON Manuals