Installation position of locking collar for 5th gear and reverse gear
WARNING: This page is about a different car, the 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installed Position Of Operating Sleeve Up To Transmission Manufacture Date 22 06 3
Locking collars with chamfer -A- and locking collars with high shoulder -B- are used for assembly.
- Note locking collar assignment to reverse idler gear. See Locking collar assignment to reverse idler gear
- Installation position:
Chamfer (arrow -1-) faces reverse gear
Low shoulder (arrow -2-) faces 5th gear
High shoulder (arrow -3-) faces reverse gear