Engine, Removing: Notes

WARNING: This page is about a different car, the 2010 Audi A5, 2009 Audi A5, and 2008 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Used Oil Collection and Extraction Unit:SMN372500
Hose Clip Pliers:VAG1921
Step Ladder:VAS5085
Scissor Lift Table:VAS6131B with Scissor Lift Table - Audi Set:VAS6131/10 and Scissor Lift Table - Q7 Set:VAS6131/13
Shop Crane - Drip Tray:VAS6208
Pry Lever:80-200
Engine Bung Set:VAS6122
Counterhold - Kit - Adapters:T10172/2-9 with Counterhold - Kit - Adapter 5: T10172/5 for vehicles with AWD vehicles
Puller - Gear Shaft Linkage:T40160

NOTE:

With lock carrier installed, engine is removed downward together with the transmission and the subframe.

Collect escaping coolant in a clean container for disposal or reuse.

During installation, cable ties must be installed at the same location.

Special tools and workshop equipment required

Used Oil Collection and Extraction Unit:SMN372500
Hose Clip Pliers:VAG1921
Step Ladder:VAS5085
Scissor Lift Table:VAS6131B with Scissor Lift Table - Audi Set:VAS6131/10 , Scissor Lift Table - A8 Set:VAS6131/11 and Scissor Lift Table - Q7 Set:VAS6131/13
Shop Crane - Drip Tray:VAS6208
Pry Lever:80-200
Engine Bung Set:VAS6122

NOTE:

With lock carrier installed, engine is removed downward together with the transmission and the subframe.

Collect escaping coolant in a clean container for disposal or reuse.

During installation, cable ties must be installed at the same location.

Special tools and workshop equipment required

Used Oil Collection and Extraction Unit:SMN372500
Hose Clip Pliers:VAG1921
Step Ladder:VAS5085
Scissor Lift Table:VAS6131B with Scissor Lift Table - Audi Set:VAS6131/10 , Scissor Lift Table - A8 Set:VAS6131/11 and Scissor Lift Table - Q7 Set:VAS6131/13
Shop Crane - Drip Tray:VAS6208
Pry Lever:80-200
Engine Bung Set:VAS6122
Counterhold - Kit - Adapters:T10172/2-9 with Counterhold - Kit - Adapter 5: T10172/5 for vehicles with AWD vehicles

NOTE:

With lock carrier installed, engine is removed downward together with the transmission and the subframe.

Collect escaping coolant in a clean container for disposal or reuse.

During installation, cable ties must be installed at the same location.