Overview - Starter
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Screw
- Tightening Specification:
- Vehicles With Manual Transmission. Refer To The Appropriate Service Information or STARTER, REMOVING AND INSTALLING, VEHICLES WITH 1.8L AND 2.0L TFSI ENGINE , STARTER, REMOVING AND INSTALLING, VEHICLES WITH 3.0L TFSI AND 3.2L FSI ENGINE and STARTER, REMOVING AND INSTALLING, VEHICLES WITH 4.2L FSI ENGINE .
- Vehicles With Multitronic Transmission. Refer To The Appropriate Service Information or STARTER, REMOVING AND INSTALLING, VEHICLES WITH 1.8L AND 2.0L TFSI ENGINE .
- Tightening Specification:
- Spacer Sleeve
- Only For 4-Cylinder Engines
- Starter
- Removing And Installing:
- Vehicles with 1.8L and 2.0L TFSI engine. Refer To STARTER, REMOVING AND INSTALLING, VEHICLES WITH 1.8L AND 2.0L TFSI ENGINE .
- Vehicles with a 3.0L TFSI and 3.2L FSI engine. Refer To STARTER, REMOVING AND INSTALLING, VEHICLES WITH 3.0L TFSI AND 3.2L FSI ENGINE .
- Vehicles with a 4.2L FSI engine. Refer To STARTER, REMOVING AND INSTALLING, VEHICLES WITH 4.2L FSI ENGINE .
- Removing And Installing:
- Terminal B+
- Nut
- 15 Nm
- Connector
- Screw
- Tightening specification:
- Vehicles With Manual Transmission. Refer To STARTER, REMOVING AND INSTALLING, VEHICLES WITH 1.8L AND 2.0L TFSI ENGINE , STARTER, REMOVING AND INSTALLING, VEHICLES WITH 3.0L TFSI AND 3.2L FSI ENGINE and STARTER, REMOVING AND INSTALLING, VEHICLES WITH 4.2L FSI ENGINE .
- Vehicles With Multitronic Transmission. Refer To STARTER, REMOVING AND INSTALLING, VEHICLES WITH 1.8L AND 2.0L TFSI ENGINE .
- Tightening specification: