LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 1092 (Passenger Protection, Airbags, Seat Belts (Coupe)) >> 69 Passenger Protection, Airbags, Seat Belts >> Side Airbags >> Front Side Airbag With Igniter, Removing And Installing >> Removing

Front Side Airbag With Igniter, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

-- Remove the front seat:

-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture:VAS6136  . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the backrest cover. Refer to OVERVIEW - BACKREST COVER, TWO-PIECE BACKREST COVER WITH BACKREST FRAME TRIM .

-- Remove the front backrest:

-- Remove the cushion from the backrest until the side airbag bolt -7- is accessible (refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT ); to do this carefully pull off the seat cover -2- and the cushion -3- in the area around the side airbag.

Fig 1: Identifying Side Airbag Components
GWWA69-10434Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -7-.

Vehicles Equipped with a Manual Adjustable Seat:

-- Release the side airbag -6- and hook -5- from the backrest frame -4- and remove the airbag from the pocket sewn into the cover -1- downward while guiding the side air bag wiring harness.

Versions with Power Seats:

-- Release the side airbag -6- and the hook -5- from the backrest frame -4- and leave it in the pocket sewn into the cover -1-.

-- Remove the cover and padding form the seat backrest. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT and remove the side airbag.