Brake Caliper, Removing And Installing, 1LT And 1LY: Installing

Always use new bolts.

-- Carefully press the brake caliper with the brake carrier and the installed brake pads over the brake rotor.

-- Tighten the brake carrier with new bolts -5-.

Fig 1: Overview Of Front Brakes Components (1LT And 1LY)

Courtesy of AUDI OF AMERICA, LLC

-- Place the brake hose in the bracket.

-- Install the wheels.

Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Lower vehicle.