Front Wheel Housing Liner, Removing And Installing: Removing

Fig 1: Identifying Driveshaft Cover, Nuts And Wing Nut -2-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -1-.

-- Remove the drive axle cover.

-- Remove the wing nut -2- on the left side of the vehicle and remove the expanding clip on the right side of the vehicle.

-- Remove the bolts -1-.

Fig 2: Removing Wheel Housing Liner

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -3- and remove the mount on the fender.

-- Remove the clips -2- and then remove the expanding clips from the wheel housing liner -4-.

-- To remove the clips -3-, unlock the release lever -2- with needle nose pliers in direction of -arrow A- and push it off the pin -1- in direction of -arrow B-.

-- Remove the wheel housing liner.

Fig 3: Identifying Clips -3-, Release Lever -2- And Pin -1-

Courtesy of AUDI OF AMERICA, LLC