Dimensions - Rear Lid Name Badges And Emblems, Sedan
Rear Lid, Sedan
- Dimension -a- = 24 mm
- Dimension -b- = 67 mm
- Dimension -c- = 4 mm
- Dimension -d- = 461 mm
NOTE:
The dimension -c- is measured from the lower edge of the engine displacement emblem to the upper edge of the quattro or ultra name badge.
Market-Specific
- Dimension -a- = 24 mm
- Dimension -b- = 67 mm
- Dimension -c- = 4 mm
- Dimension -d- = 461 mm
NOTE:
The dimension -c- is measured from the lower edge of the name badge to the upper edge of the quattro badge.