Fog Lamps, Audi S8, Removing and Installing

Removing 

Fig 1: Removing Air Intake Grille In Lower Part Of Bumper Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Switch off ignition and remove ignition key.
• Turn light switch into "0" position.
• Remove air intake grille - 1  - in lower part of bumper cover - arrows  -.

Fig 2: Identifying Bolts And Fog Lamp Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - 1  - and - 2  -.
• Remove the fog lamp housing - 3  - counter clockwise - arrow  - on the left side and clockwise on the right side.
• Remove fog lamp housing from bumper cover.
• Disconnect connector.

Installing 

Install in reverse order of removal, observing the following:

• Adjusting fog lamps → 01 - MAINTENANCE .

Tightening torque