Daytime running lamp (Audi S6), removing and installing

Fig 1: Releasing Clip Using A Screwdriver And Removing Air Inlet Grille At Lower Part Of Bumper Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Release clip using a screwdriver - arrow A  - and remove air inlet grille - 1  - at lower part of bumper cover - arrows B  -.
• Remove front bumper cover → 63 - Bumpers Removal And Installation .

Fig 2: Identifying Bolts, Clip, Daytime Running Lamp, And Bumper Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - 1  - and - 2  -.
• Release clip - 3  - and remove daytime running lamp - 4  - toward front out of bumper cover - arrow  -.

Installing 

Installation is performed in reverse order of removal, noting the following:

Tightening torque