LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> S5 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Engine Assembly (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Cabriolet)) >> Engine Assembly >> Engine Cover >> Engine Cover, Removing And Installing >> Installing

Engine Cover, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- To prevent damage to the engine cover, do not hit it with a fist or a tool.

-- Pay attention to the oil filler tube when positioning the engine cover.

-- Press on the engine cover with both hands first on the ball pin in the rear, and then with both hands on the ball pin in the front.

scientia non olet · About LEMON Manuals