Engine Mount, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Engine Support Bridge:10-222A
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer to component overview and Parts Information prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Engine mount
NOTE:
To avoid repeat repairs, do the following if the engine mount is faulty:
Replace the faulty engine mount and its retaining plate.
Depending on vehicle equipment the engine mount on the opposite side must also be replaced.
The following describes the work procedure on the left engine mount.