Overview - Tire Pressure Sensor
Courtesy of AUDI OF AMERICA, LLC
- Left Front Tire Pressure Monitoring Sensor -G222-, Right Front Tire Pressure Monitoring Sensor -G223-, Left Rear Tire Pressure Monitoring Sensor -G224- or Right Rear Tire Pressure Monitoring Sensor -G225-
- Replace the valve insert each time a tire is changed. Refer to the Parts information.
- When using used tire pressure sensors, replace the union nut, valve insert, seal, sealing washer and valve cap. Refer to the Parts information..
- After installing, visually check if the sensor is secure in its bed.
- Replace damaged sensors.
- Do not clean the sensors with steam blasting or strong compressed air.
- Removing and installing. Refer to TIRE PRESSURE SENSOR -G222- / -G223- / -G224- / -G225-, REMOVING AND INSTALLING .
- Valve Insert
- Replace damaged valves.
- When changing a tire, replace the valve insert.
- Sealing Washer
- When installing the new sealing washer, counter-hold it to prevent the valve body from pushing through. If the connection breaks, then replace the Tire Pressure Monitoring Sensor --.
- Seal
- When installing the new seal, counter-hold it to prevent the valve body from pushing through. If the connection breaks, then replace the Tire Pressure Monitoring Sensor --.
- Rim
- Union Nut
- Valve cap
- Use only original valve caps from the repair set. Refer to the Parts information.
- Do not use comfort valve caps or metal caps