LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> S5 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 533 (Exterior Body Panels (Hood, Lids) (Sedan)) >> (55 Hood, Lids) >> Hood >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

After complete removal of the gas-filled strut ensure correct positioning during installation: the gas-filled strut tube must be attached on the body-side.

-- Press gas-filled strut onto ball stud and engage.

scientia non olet · About LEMON Manuals