Calibration Procedure Without A Previous Axle Alignment
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect battery charger. Refer to GENERATOR .
-- Select the ACC calibration button on the alignment computer.
-- Mount the quick clamps to the rear wheels.
-- Mount the measurement sensor to the rear wheels.
-- Perform a wheel run-out compensation and the rear wheels.
NOTE:
The :VAS 6430 must not be moved on the calibration beam.