Overview - Front Backrest, Power Standard Seat

Fig 1: Exploded View Of Front Backrest

Courtesy of AUDI OF AMERICA, LLC

1. Seat Pan
2. Bolts
   • 33 Nm
   • Always replace if removed
   • Threaded holes for bolts must be cleaned, for example, with a thread tap
   • Self-locking
3. Backrest
   • Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING, POWER STANDARD SEAT .
4. Headrest
   • Power
   • Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING, POWER HEADREST .
5. Entry Assistance Trim
   • Removing and installing. Refer to ENTRY ASSISTANCE TRIM, REMOVING AND INSTALLING, POWER STANDARD SEAT .
6. Handle
   • With bracket (entry assistance)
   • Removing and installing. Refer to ENTRY ASSISTANCE HANDLE WITH BRACKET, REMOVING AND INSTALLING .
7. Button
   • With entry assist
   • Overview. Refer to OVERVIEW - ENTRY ASSISTANCE BUTTON .
8. Wiring Harness
   • From the side airbag to the connector station
   • Depending on optional equipment, there may be more wiring harnesses, such as for seat heating, lumbar support