Adaptive Cruise Control Sensor -G550- Overview

Fig 1: Identifying Adaptive Cruise Control Sensor

Courtesy of AUDI OF AMERICA, LLC

1. Cover
2. Clip
   • Installed On Vehicles From MY 12.
   • Always Replace The Clip If The Stud Bolt -3- Was Removed.
   • Removing And Installing, Refer To DISTANCE REGULATION CONTROL MODULE CLIP, FROM MY 12 .
3. Stud
   • Always Replace The Clip -2- If The Stud Bolt Was Removed.
   • Observe Adjustment Dimension When Installing. Refer To Figure
4. Bracket
   • For Vehicles Through MY 12.
5. Nut
6. Bolt
   • 8 Nm 
7. Bolt
   • 8 Nm 
8. Angle
   • Installed On Vehicles From MY 12.
9. Speed Nut
10. Bracket
    • For Vehicles From MY 12.
    • If A Repair Is Being Performed, Then Replace The Bracket With The Newer Style Bracket -4-. Allocation Parts Information.
11. Adaptive Cruise Control Sensor -G550-
    • Different Versions, For Allocation Refer To The Parts Information.
    • Removing and installing, refer to ADAPTIVE CRUISE CONTROL SENSOR -G550- .
12. Connector
    • Squeeze Both Clips To Disconnect.