Requirements To Identify A Concern

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fault finding on the electrical equipment, vacuum system and air duct fault-finding has not revealed any faults. use the Vehicle Diagnostic Tester A/C system "Guided Fault Finding" function (and the battery regulation). Refer to appropriate SYSTEM WIRING DIAGRAMS information and COOLING OUTPUT, CHECKING .

The OBD in the A/C system "Guided Fault Finding" function (for example using the Vehicle Diagnostic Tester in the A/C system "Guided Fault Finding" function) does not identify any fault status for a concern.
In the A/C system control module measured values no shut-off condition for the A/C compressor is shown. Use the Vehicle Diagnostic Tester in the A/C system "Guided Fault Finding" function.