LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> S4 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1190 (Cylinder Head, VALVETRAIN- CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA) >> 15 Cylinder Head, VALVETRAIN >> Intake And Exhaust Valves >> Valve Guides, Checking >> Test Sequence

Test Sequence

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWN15-10914Courtesy of AUDI OF AMERICA, LLC

-- Insert the valve into guide. The valve stem end must be flush with the guide. Due to differences in valve stem diameter, only use intake valves in intake valve guides, and exhaust valves in exhaust valve guides.

-- Determine the tilting clearance.

scientia non olet · About LEMON Manuals