Taillamp/rear fog lamp bulb, removing and installing
Removing
- Turn light switch to position "0".
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Unclip plug - 1 - from luggage compartment trim - arrow - using a small screwdriver.
- Remove nut - 1 - and detach retainer bracket.
- Remove bulb holder - 2 - from housing (press apart retaining tabs - arrows - ).
- Screw bulb out of bulb holder.
Installing
Install in reverse order of removal, noting the following:
- Insert new bulb in bulb holder.
Tightening torque
| Component - fastener | Nm |
| Retainer bracket to housing - nut | 3.5 |